Payments processed by
YOU CAN CALL US ON:
+44 (0)114 224 2257
OR FEEL FREE TO EMAIL US
Latest News
LVL Technologies products are utilised by the Central Laboratory of the Blood Donation Service West in Hagen, Germany in the modern archiving of blood... more
We’re launching a try before you buy scheme for our SciPette Plus range! The new scheme will allow you to try the SciPette Plus in your real-ti... more

2D Readers & Plate Accessories

SAFE® Access Tube Reader

The SAFE Read Single Express 2D reader offers easy, out-of-the-box set up and is delivered pre-calibrated and ready to read. This instrument can read all racks in the SBS format, regardless of the configuration or number of tubes, and by a quick and easy change of mask (included as standard) it can also scan all Cryobox formats. Our new automatic rack type detection feature means that you no longer have to configure the reader for all rack types. Simply place your rack on the scanning window and the software will work out what type of rack it is and run the scan. 


Safe® Access Tube Presenters

LVL 2D barcoded tube presenter banner

It is not unknown, under the busy everyday conditions in the lab, for the wrong tube to be inadvertently removed from the tightly packed SBS / CRYO rack. D5 quickly turns into E6. Even if the error is detected during the scan, the process flow is interrupted. However, even the careful selection of the tube to be removed can become strenuous in the long run.The LVL tube presenter is a simple tool for the processing and checking of individual samples. Simply insert the single pin into the appropriate position, place the rack on it and the protruding tube can be safely and easily removed. The column pin can be used for entire columns.

 

Safe® Access Defrost Roller SBS

The formation of ice on the bottom of the tubes can make the reading process difficult. This is especially true, if the samples are stored in the nitrogen gas phase. So that the 2D codes can be read quickly in such cases, it not only requires a good reader but also the rapid removal of ice from the bottom of the tube.The defrost roller is the perfect accessory for this purpose. Two rollers are required for optimal application. The reservoir of the first roller is filled with an ice dissolving liquid, preferably isopropanol or ethanol. Contact with this roller dissolves the ice, while the second roller is used for drying. This approach will facilitate the checking of samples.

 

Click here to return to the main 2D Barcoded Tube Webpage 

Page 1 of 1    
Results per Page:   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Back to Top